9 Lessons Your Parents Taught You About Repair Patio Door Lock > 자유게시판

How to Repair a Bad Patio Door Lock

A safe patio door is a vital element of home security. If it is difficult to lock, it can be a nightmare.

In many cases, a stubborn lock is the result of the wrong alignment or just wear and tear. It may be possible to restore the lock's function by adjusting or lubricating it. If these troubleshooting methods fail, you may replace the mortise lock and handle.

Clean and Lubricate

Over time, dust, dirt and grime can make it difficult to open and close doors. Regular cleaning and lubrication can help to prevent your security device from becoming stiff or stuck. This will help you save money on Repair Patio Door bills and extend the life of your door.

To begin, you'll have to clean the lock's cylinder. To do this, you'll need a spray can of penetrating oil, such as WD-40. Spray a small amount oil into the keyhole and then rotate the key to spread the oil. Avoid using household oil or other solvents that can harm your locks. Spray a bit on the key.

After cleaning your lock cylinder, it's time to grease. You can use a dry lubricant such as graphite powder or sprays of silicone. Graphite is a lubricant that lasts for a long time that doesn't attract dust, unlike liquid oils. It's an excellent choice for locking lubrication. Silicone sprays are able to withstand freezing temperatures and are resistant to water. However, they might need multiple coats in order to be effective.

You can also use sprays for de-icing, which is specifically made for colder weather and will remove frost and ice from the lock mechanism. A few coats of this will aid your lock unlock and then lock again easily.

How often you have to lubricate your locks will rely on the environmental conditions. A coastal location will expose your door to salty air, which can cause corrosion. Temperature changes can impact the performance of your lock. The standard rule of thumb is to oil your locks twice per year, or more frequently when you live in an area that experiences harsh weather conditions. Lubricating your locks can save you money on repairs and ensure that your patio door continues to perform as it should for the years to come.

Reposition the Lock Cylinder

If your upvc patio door repairs door lock isn't operating properly, it could mean that one or more of the components are damaged or misaligned. Regular inspection and prompt repair of a faulty patio door lock will prevent additional damage and ensure that your doors are safe. You can fix doors that are locked or unlocked by tightening loose screws, altering the lock mechanism, or replacing the lock cylinder.

Begin by inspecting the exterior and inside of the lock to find signs of damage or misalignment. Locks for patio door glass repair doors may expand or contract depending on the weather, and may even shift over time. This slight movement may cause the locking mechanism to be misaligned and cause issues when opening or closing the door.

Then, look over the lock cylinder for obstructions in the keyway hole. An obstructed or corroded lock cylinder is difficult to open and may eventually cause damage to the lock pins, cam or latch springs. If the cylinder does not fit easily, you can get rid of any obstructions with a pair of picklocks and tweezers. If the problem persists you may need to take out the cylinder in order to locate the source.

If the lock cylinder isn't screwed into the body of the lock, you can loosen it by unscrewing a flat screw inside the faceplate of the cylinder. This screw will let you rotate the cylinder, and may even help restore the proper alignment.

Look for a small tab that moves with the key. It's usually located at the end. This little clip, called a "release tab" prevents the cylinder from sliding into the body of the lock. A standard key will slide this tab back to release the cylinder and allow it to be removed and put back in.

If the lock cylinder of yours is stuck, you may be able restore proper alignment by rotating it until the latch bolt engages with the strike plate and the handle or knob can be pushed into and withdrawn. Reassemble the lock once you have restored the proper alignment. Test it to see if it works. If your patio door lock isn't functioning properly it's likely that another component like the latch spring or latch needs to be replaced.

Lock the Screws

Locks for patio doors can be damaged by regular usage, extreme temperatures, dirt and dust. Unless properly cared for these delicate components can get worn out and cause your door to not lock properly. Most lock problems are easily repaired with a few easy steps.

You should first clean the lock mechanism. Use a damp cloth to get rid of any dust or dirt that might be present, and dry the components thoroughly. After cleaning, a small amount of silicone-based lubricant can keep moving parts running smoothly and efficiently. Avoid lubricants that contain oil bases, they can attract dust and debris which could cause issues.

If your patio door comes with a security footlock, make sure that the footlock is aligned correctly with the strike plate. In most instances, this will require adjusting the screws that secure the foot lock to the frame of your patio door glass repair near me door. To adjust the footlock you need to loosen the screw using a Robertson screwdriver and gently pull it up or down. After the adjustment is completed then tighten the screw.

The most common problem when it comes to fixing patio door handles is the misalignment of the strike plate and latch. This could be due to everyday wear and tear or the latch could be set above or below where it should be.

Begin by removing the old handle, then find the bolts or screws that secure it. Be sure to keep track of them as you will need them later when installing the new handle. Remove the spindle that was in use and slide the new one into place on the interior of the door. Make sure it is in alignment with the holes in both the exterior and interior handle. Once the new spindle is installed then reinstall the interior and exterior handles, making sure that they are in alignment with the screws or bolts that secure them.

Once you've made any necessary adjustments to your patio door, be sure to test it by locking and closing the door. If everything is in proper alignment, the door will open and close without any additional force. If you're still having trouble, you might need to move the latch or strike plate, or the lock's cylinder might be damaged and must be replaced.

Replace the Latch

If your patio door locks are not working, it could be time to replace the lock. Installing a new lock is a fairly simple home improvement project that most homeowners can complete by themselves. Start by sliding the patio door open and then removing the current lock from the inside of the door. Carefully study how the existing lock is screwed to the door and the jamb so that you can determine the kind of lock you'll need purchase.

Before installing the new latch, loosen screws that hold the strike plate. This is the part of the lock that is mounted on the edge of the frame of the door. Adjust it either horizontally or in an upward direction to align it with the holes in the latch. After you've adjusted the strike plate, secure it in its place and tighten the screws.

After all the parts of your patio door are relocated or replaced, reassemble and secure them according to the instructions given by the manufacturer. When you're done testing the latch. Make sure it is fitted correctly and is secured when the door is closed. If it does the lock will be able to latch onto the door. If it does, your patio door lock is working as it should and able to give you the security and privacy you've come appreciate from your home's doors.

Like other parts of your home your patio doors also need to be properly aligned in order for them to function efficiently. Over time, heat and cold weather, dirt and debris, and other factors can cause hinges, door frame, and locking mechanism to shift slightly. When these elements are misaligned it's similar to trying to insert a key in the wrong keyhole: It just doesn't work. It is possible to fix a problem which seemed impossible by following these easy steps. So, give yourself an ovation for tackling this task and reclaiming your patio door's lock position! We're betting you won't face any more trouble opening or closing the door from now on out. Have fun! We're here to help if you have any concerns or questions.