Ghost Immobiliser Problems Tips From The Most Effective In The Industry > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized item from theft. It's discreet and does not require any additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be changed up to 20 times. This will allow your vehicle to start.

Simple change of PIN code

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of aftermarket security devices, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking system may help you locate your vehicle in the event of it being stolen however, it won't prevent the crime. An immobiliser, on contrary is exactly what says on the label: it shuts off the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your vehicle.

By using the buttons that are already present in your car, the ghost device creates an exclusive sequence that has to be entered before the engine will start. This can be done by using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This is a great solution when you wish to donate your car to valet parking or servicing. The immobiliser will remain active.

The Ghost is a unique and ingenious device that is used in conjunction with the buttons of your car rather than being a standalone unit. This means that it is not just a powerful protection against theft of your vehicle, but it can also be transferred onto any other vehicles you have, making it more investment-wise than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that safeguards your vehicle from key cloning and hacking. It also stops ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU over the CAN data bus, which disables the engine. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to make sure it works with all vehicles. It is also immune to jamming devices that are a popular technique that car thieves use to bypass immobilisers.

The benefit of CAN data over traditional systems is that they operate in a silent manner. It's not detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console or door panels, to create an unique sequence of disarming. You can even make this sequence up to 20 presses long to increase security. The iPhone app lets you make one, authorized connection, with a pairing code that is unique to the Ghost and the communication between the two is encrypted.

The Ghost also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to start when the correct PIN code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service or for maintenance without having to enter a PIN.

Each vehicle is tested

The Autowatch range rover sport ghost installer is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device snoops on electronic signals that block the system of your vehicle from running its normal start-up routine until you input a custom passcode. The system can be turned on or off by using your smartphone app, without the need for extra wires.

The standard factory immobilisers function by using a transponder, which is embedded in the key. It transmits a message to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder from a different vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser was created by an South African company at the top of the line in vehicle security technology. It shields you from hacking or key cloning, and even key theft. Only by physically towing your vehicle away could a thief get it and not be able to drive it.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an individual, changeable PIN code sequence that must be entered prior to you can drive. This is done without any additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also inaccessible to devices for diagnosis and transmits radio frequency signals, which means thieves cannot make use of sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle to ensure that it can't be removed or disabled by thieves. It's more difficult to remove than a car alarm, which requires disarming via an action sequence. This makes it an excellent alternative to a GPS tracker that can assist in locating your vehicle after it has been taken.

Emergency PIN code override

You do not have to look far on social media to find stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of security to stop your vehicle from being taken in the event of being targeted by thieves. It is created by creating an unique pin code push sequence using your existing buttons on the steering wheel, door panel and centre console. The unique pin code is entered alongside the original key fob to stop the engine from starting. The unique override PIN can be found on the black card you will receive after installation. It is simple to remember because there are no LED indicators.

The device is hidden within the vehicle's wires, and does not emit radio signals, therefore it can't be identified by modern criminals using diagnostic software that is able to recognise what type of security system you have installed. This makes it a great alternative to an alarm.

Unlike other security systems, which rely on a relay in the engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely through a digital block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems, but this has to be stated prior to the installation of the device. They are also compatible with service/valet modes and a great alternative to a tracker device when you take your car into the dealer for an electrical issue.

Service/Valet mode

In recent years there has been an increase in vehicles being stolen without the owners keys. It's more easy than ever to steal your pride & joy due to the availability of key cloning tools & door lock picks. We have developed the Autowatch ghost installations reviews Immobiliser to combat this. It stops your vehicle from being driven even if your keys have been copied.

It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequency or a key fob. This means that it can't be detected by diagnostics or other car hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to get around the system, since only the correct PIN code can allow the engine to start.

The device is concealed inside your car, using buttons on the steering wheel, the centre console and door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being driven away or started in the event that a PIN code hasn't been entered first. If you are driving away with the device in motion it will display an indicator on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run normally. If you do not enter your PIN at this point, the indicator will continue to flash and require a new pin code every time you attempt to start your car.